Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ebisawa, Katsumi; Yamada, Hiroyuki; Tsutsumi, Hideaki*; Shibata, Katsuyuki; Ando, Kazuhiro*; Baba, Osamu; Suzuki, Hideyuki
JAERI-Data/Code 2001-009, 96 Pages, 2001/03
JAERI-Data-Code-2001-009.pdf:4.14MB
no abstracts in English
;
JNC TN9400 2000-060, 168 Pages, 2000/05
JNC-TN9400-2000-060.pdf:4.09MB
Optimal vertical isolation characteristics were studied for the structural concept of vertical seismic isolation system, which uses a common deck and a set of large coned dish springs. Four kinds of earthquake wave and three kinds of artificial seismic wave were used. The earthquake response analysis of a base isolated building was carried out considering some ground conditions and some vertical vibration characteristics of the building isolator. Floor response and acceleration time history at the vertical isolation level were arranged. Using the acceleration time history as a seismic input, the earthquake response analysis of the vertical isolation system according to single degree of freedom model was carried out. Linear analysis and non-linear analysis were made. ln the linear analysis, vertical isolation frequency was examined within 0.8 to 2.5 Hz, and damping ratio was examined within 2 to 60%. ln the non-linear analysis, it was examined within vertical isolation frequency 0.5 to 5Hz, which depended only on the rigidity of the coned disk spring, rigidity ratio of the damping devise 1 to 20 and yield seismic intensity of the damping devise 0.01 to 0.2. As the optimal vertical isolation characteristics of the system, the criterion of largest relative displacement, maximum acceleration and maximum value of the floor response acceleration between 5 to 12Hz was set, the combination region of the appropriate parameter were examined. ln case of largest relative displacement 50mm, acceleration response magnification of 0.75, floor response magnification of 0.33 were used as a criterion, from the result of the linear analysis, vertical frequency was set at 0.8 to l.2 Hz, and by combining the damping ratio over 20 %, it was proven that appropriate vertical isolation characteristics were obtained. The result of the non-linear analysis showed that the combination of the coned disk spring of vertical frequency 0.8 to 1.0 Hz and the damping element of rigidity ...
Ishida, Toshihisa; *; *
Journal of Nuclear Science and Technology, 34(8), p.771 - 782, 1997/08
Times Cited Count：17 Percentile：77.48(Nuclear Science & Technology)no abstracts in English
PNC TN9410 97-032, 126 Pages, 1997/04
Study was made on the effect of dynamic interaction between reactor building and common deck isolation structure. Dynamic response analyses were made with a coupled and a decoupled model of the reactor building and the isolation structure. The effect of the dynamic interaction was evaluated by comparing these analysis results. The results of the study can be summarized as below; (1)Dynamic coupling effect between reactor building and the common deck isolation structure is not significant. This can be attributed to the fact that the isolation frequency is sufficiently lower than the fundamental frequency of the soil-structure system. (2)The decoupled analysis model was found to give response results with practically sufficient accuracy and slight conservatism. (3)The effect of the response of common deck isolation structure on the response of the reactor building is also negligible.
Yoshida, Hiroshi; *; *; Enoeda, Mikio
JAERI-M 92-083, 28 Pages, 1992/06
no abstracts in English
; Miyachi, Kengo; *; Ichige, Hisashi
KEK-Internal-89-7, 4 Pages, 1989/08
no abstracts in English
JAERI-M 9447, 57 Pages, 1981/04
no abstracts in English
; ; ;
Nuclear Instruments and Methods, 174(1-2), p.201 - 208, 1980/00
no abstracts in English
